Description:

Here is the world's most durable, easy to use nozzle. Machined brass head and molded nit rile rubber allows the water saver to be stepped on or driven over and it will still work. Simply flex the rubber hose extension and instant flow control from a drizzle to full flow. The water saver will far outlast any other water nozzle. There is no need to turn the water supply off because the water saver will not leak, saving you money and time.

Read customer testimonials about our water savers.

Specifications:

1. Overall length 8 7/8"
2. All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
3. Equipped with 3/4" garden hose thread hose connection (standard garden hose connection)
4. Hose ends are interchangeable with other model water savers.
5. Hose is a molded rubber compound designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
6. For use on normal city or well water pressure. Not for use on boosted water pressure.
7. 05SP FAN SPRAY for use on cold water only.

Description:

The world's most durable water nozzle is now available in a stainless steel, food grade material. Just like our standard water saver, simply flex the rubber end to activate the flow, then drop or let off to stop the flow.

Specifications:

1. USFDA food grade compliant 300 series stainless steel and USFDA compliant rubber nozzle
2. Overall length 8 7/8"
3. Equipped with 3/4" garden hose thread hose connection (standard garden hose connection)
4. Hose ends are interchangeable with other model water savers.
5. Recommended temperature range is -40°F to +150°F continuous or occasional operation at 212°F with proper personal protective equipment.
6. For use on normal well or city water pressure.
7. 05SPSS FAN SPRAY TO BE USED ON COLD WATER ONLY.

Description:

Same size and operation as our Air Saver, but with a 3/8" hose end opening providing a medium pressure stream of water at 1 gallon per minute average. Simply flex the rubber nozzle for instant flow control from a trickle to full flow.

Specifications:

1. Overall length 4 5/8”
2. Available in 1/4" and 3/8" female NPT hose conections
3. All brass fittings
4. Molded nozzle of chemical resistant rubber
5. Can be utilized on normal well or water line pressure at continuous temperature up to 150 F. and occasional operation up to 212° F with proper personal protective equipment.

Description:

The worlds most durable blow gun is now available with a new 45° molded rubber nozzle. For hard to reach, tight areas or low visibility this will solve your issue. All the same features as our time tested WIN Air Saver. Can be used for air, water or oils. Normal water line pressure will produce a 3/16" diameter jet spray pattern..

Specifications:

1. Overall length of 12W, 12WB is 6 1/4"; 12WHB is 6 5/8"
2. Machined brass with stainless steel throw pin
3. Maximum inlet pressure is 150 psi
4. Chemical resistant molded rubber
5. Can be used continuously with water to 150° F. Occasional operation at 212° F with proper personal protective equipment.

Description:

These units are heavy-duty versions of Lonn's standard water savers. They are designed to with stand much greater pressure and harsh environments. The water or other liquid need not ever be shut off when the job is done as the liquid will only pass when pressure is applied to bend the hose end. When using hot water there is less heat transfer to the hand when using the A & B water saver vs. the standard water savers.

Specifications:

1. Overall length 8 7/8"
2. All brass fittings with exterior rubber bumpers.
3. Equipped with 3/4" garden hose thread connections (standard garden hose connection)
4. Hose ends are interchangeable with other model water savers.
5. Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.

Description:

These units are heavy-duty versions of Lonn's standard water savers. They are designed to with stand much greater pressure and harsh environments. The water or other liquid need not ever be shut off when the job is done as the liquid will only pass when pressure is applied to bend the hose end. The newly optional solid brass handle makes operation easier and is great for hot water use. When using hot water there is less heat transfer to the hand when using the A & B water saver vs. the standard water savers.

Specifications:

1. Overall length 8 7/8"
2. All brass fittings with exterior rubber bumpers.
3. Equipped with 3/4" garden hose thread connections (standard garden hose connection)
4. Hose ends are interchangeable other model water savers.
5. Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.

Description:

Easy water control delivers a fine spray for many different operations. This is a lightweight, sensitive unit, at the same time being very tough and durable. Lonn's piston principle or positive control makes this spray nozzle highly efficient in delivering a fine mist-like spray of water and other light liquids.

Specifications:

1. Overall length 5 1/8"
2. Available in 1/4" and 3/8" female NPT hose connection
3. All brass fittings
4. Molded of chemical resistant black rubber
5. Will operate on normal well or water line pressure
6. Stainless steel valve assembly